OBO GLAND + NUT M25

The fastest and most convenient way to ensure cable tightness and tensile strength in junction and installation boxes is by using OBO’s V-TEC VM cable glands. With the integrated sealing edge and special lamellar design, an IP68 protection rating is achieved. The tensile strength and tightness have been tested according to DIN EN 62444.

The thread can be either metric or PG – universally applicable. Once installed, the setup is permanent: the optimally selected thread with the correct pitch ensures lasting vibration resistance.

Application: from junction boxes in residential areas to distribution panels in industrial facilities.

Operating temperature range: -20°C to +65°C

CO2 footprint (GWP) from cradle to gate: 0.0664 kg CO₂e / 1 piece
Halogen-free: yes
Explosion-proof: no
Type of seal: sealing ring
Thread length: 10 mm
For explosive zone: no
For explosive gas zone: no
For explosive dust zone: no
Bend protection: no
Design: straight
Material: polyamide
Non-flammable material: VDE 0471/DIN 695 part 2-1, test temperature 650°C
Unstable torque: 5 Nm
Nominal thread size: 25
Cable strain relief: yes
Split gland: no
Size E: 32 mm
Max. length L: 35 mm
Min. length L: 26 mm
Wrench size: 29
Length L1: 10 mm
Length L2: 6 mm
Dimensions: M25
Thread: M25 x 1.5
With locknut: no
Flat cable connection: no
Thread system: metric
Protection rating: IP68
Thread pitch: 1.5 mm
Max. operating temperature: 65 °C
Min. operating temperature: -20 °C
Reinforced with glass fibers: no
Universal seal: no
Max. sealing diameter D: 17 mm
Min. sealing diameter D: 9 mm
Impact resistant: no
Color: light grey; RAL 7035
Hexagon - size of the wrench flats: 32 mm